1x2 Mechanical PM Fiberoptic Switch
ACP’s PMS Series switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. At the same time, the polarization state of the signal is preserved.
Features
- High Extinction Ratio
- Low Insertion Loss
- High Channel Isolation
- Highly Stable and Reliable
- Epoxy Free Optical Path
Applications
- Optical Signal Routing
- Network Test Systems
- Instrumentation
Specifications
Parameter | Unit | Specifications |
---|---|---|
Operating Wavelength | nm | 1310 ± 40 or 1550 ± 40 |
Insertion Loss | dB | ≤ 0.8 |
Wavelength Dependent Loss | dB | ≤ 0.15 |
Extinction Ratio | dB | ≥ 18 (20 Typ.) |
Channel Cross Talk | dB | ≥ 55 |
Return Loss | dB | ≥ 50 |
Repetability | dB | ± 0.02 |
Switching Speed | ms |
Typ.: 4 Max.: ≤5 |
Operating Voltage | V | 5 |
Durability (Cycles) | Million | 10 |
Optical Power | mW | ≤ 500 |
Fiber Type | Panda PM fiber | |
Operating Temperature | °C | 0 to +70 |
Storage Temperature | °C | - 40 to +85 |
Package Dimensions (LxWxH) | mm | H= 22.3x12.1x11.0 |
1. The PM fiber and the connector key are aligned to the slow axis.
2. The ER is for fiber ≤ 0.75 meter. Increase fiber length can decrease the ER.
3. For devices with connectors, insertionloss will be 0.3dB higher, return loss will be 5dB lower, and extinction loss will be 2dB lower.